Jotun Alkydprimer
Jotun Alkydprimer
Jotun Paints


Jotun Alkydprimer

In Stock

From £30.00 (ex VAT)

  • Please select an option from the list above.

Manufacturer:   Jotun Paints


Jotun Alkydprimer is a single pack oxidatively drying alkyd coating. It can be used as primer or mid coat in atmospheric environments as part of a suitable alkyd System. This product is certified not to spread surface flames and is resistant to dry heat up to 120°C.

  • Good weather and colour stability
  • Certified not to spread surface flames
  • Resistant up to 120°C dry heat
Application Method  Air / Airless Spray, Brush or Roller
Surfaces  Industrial Structures
VOC Level 397g / Litre
Coverage  10.4m² / Litre
Touch Dry  3 Hours 30 Minutes @ 10°C / 1 Hour @ 40°C
Over-Coating  22 Hours @ 10°C / 10 Hours @ 40°C
Maintenance Cycle 4 Years
Thinning & Cleaning Jotun No.2
Number of Coats 2

Additional Information

Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Blast-cleaning to Sa 21⁄2 (ISO-8501-1:1988). Power tool cleaning to min. St 2 (ISO 8501-1:1988) may be acceptable, subjected to exposure conditions.
Shopprimed steel: Clean, dry and undamaged approved shopprimer. Coated surfaces Clean, dry and undamaged compatible primer. 
Other surfaces: For aluminium substrates, thorough washing and sweeping with a nonmetallic blast medium is required. The coating may be used on other substrates.

Please contact us for more information.

Typical Paint System: Alkydprimer 2 x 40 μm (Dry Film Thickness) followed by Pilot II 2 x 40 μm (Dry Film Thickness). Other systems may be specified, depending on area of use.

Typical Use: Suitable for properly prepared carbon steel, aluminium and wooden substrates.
Marine: Recommended for touch-up purposes.
Protective: Suitable for a wide range of industrial structures.

Spray: Use air spray or airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.

Continue Shopping

Related Products

Jotun Thinner No.2
  • JT-2
  • Jotun Thinner No.2
  • From £26.50

We're here to help

Not sure which is the best product? Can’t find what you need?

Complete and submit this form for assistance from one of our specialist advisors.