ElmbridgeElmbridge

Jotun Barrier
Jotun Barrier
Jotun Paints

ICP-JB

Jotun Barrier

In Stock

From £24.25 (ex VAT)

£74.95
£149.95
£24.25
  • Please select an option from the list above.

Manufacturer:   Jotun Paints

Description

Jotun Barrier is a well proven anticorrosive, zinc rich epoxy primer, designed for coating systems where extended durability and excellent corrosion protection are required. This two pack polyamide cured zinc rich epoxy coating has high zinc dust content.

  • Designed for severe corrosive environments
  • Fast dry-to-recoat and dry-to-handle
  • All-year-round
  • Pre-qualified in NORSOK system 1

The Barrier Range are two-pack zinc rich epoxy primers with a high content of zinc that complies with the compositional requirements for SSPC Paint 20 level 2 and ISO 12944. As a zinc rich primer on blast cleaned steel. Barrier products are used in combination with advanced coating systems to further improve protection against corrosion.

Application Method Airless Spray or Brush
Surfaces Structural Steel / Offshore Environments / Buildings
VOC Level 420g / Litre
Coverage  4.2m² / Litre
Touch Dry 20 Minutes @ 10°C / 4 Minutes @ 40°C
Over-Coating 2 Hours @ 10°C / 40 Minutes @ 40°C
Maintenance Cycle 2 Years
Thinning & Cleaning Jotun No.17
Number of Coats  2

Additional Information

Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Blast cleaning to min. Sa 2 1⁄2 (ISO 8501-1:1988) or for maintenance UHPWJ to WJ2 (NACE No.5/SSPC-SP 12). Roughness: using abrasives suitable to achieve minimum grade Fine (ISO 8503-2).
Shop primed steel: Clean, dry and undamaged approved shopprimer. Other surfaces The coating may be used on other substrates. Please contact us for more information.

Typical Paint System: Barrier Range 1 x 25 - 90 μm (DFT) followed by subsequent coating(s) by choice e.g. Epoxy, Acrylic or Vinyl.
Other systems may be specified, depending on area of use.

Typical Use: Protective: Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.

Application:
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.

Continue Shopping

Related Products

Jotun Barrier 90
  • ICP-JB90
  • Jotun Barrier 90
  • £157.95
Jotun Thinner No.17
  • JT-17
  • Jotun Thinner No.17
  • From £31.50
Jotun Barrier 80
  • ICP-JB80
  • Jotun Barrier 80
  • £149.95
Jotun Barrier ZEP
  • ICP-JBZEP
  • Jotun Barrier ZEP
  • £119.97

We're here to help

Not sure which is the best product? Can’t find what you need?

Complete and submit this form for assistance from one of our specialist advisors.

Submit