Manufacturer: Jotun Paints
Description
An alkyd, oil based, water-borne special stain particularly suited for impregnated timber.
Key Features:
- Contains effective film conserving agent that counteracts mould and algae growth on the surface.
- Enhances and preserves the natural and beautiful wood appearance.
- Protects against cracking, decay from light and moisture.
- Has good penetrating and water repellant properties.
| Application Method | Brush or roller |
| Surfaces | For outdoor use |
| VOC Level | 130g / Litre |
| Coverage | 6-10m² / Litre |
| Touch Dry | 10 Hours @ 10°C / 4 Hours @ 23°C |
| Over-Coating | 24 Hours @ 10°C / 12 Hours @ 23°C |
| Thinning and Cleaning | Water |
| Number of Coats | 2 |
Additional Information
Surface preparation:
The substrate must be clean, sound and dry: New impregnated woodwork: Must be allowed to dry for 1-2 months. Any exudations of cuprous salt (green crystals) to be previously removed using a stiff brush. Rinse well with water (use a garden hose) and allow to dry. Old, impregnated woodwork: Weathered surfaces should be sanded to fresh wood. Untreated, oiled or stained wood must be treated with DEMIDEKK Terrassfix according to instructions. NB! It is important to use clean water to rinse off DEMIDEKK Terrassfix
Topcoat: DEMIDEKK Decking and Garden stain. Apply only one thin coat when the substrate is dry. Apply the product along the full length of 1 – 2 boards at a time. Wipe off any excess using a lint free cloth. It is intended to penetrate the wood and should not be allowed to form a thick film on the surface.
To achieve an even result it is recommended to brush over into previous area.
Finishing treatment:
A suitable detergent is recommended for yearly cleaning. This will remove dirt and freshen the stain colour. Further maintenance depends on the wear and tear.
Typical Use: Recommended for use on substrates where a translucent, non-film forming protection is required.
Application: Contents of tins with different production numbers should be mixed. Stir well. The stain will penetrate the wood differently around knots than more porous parts of the wood. This will give a beautiful iridescence but may reduce the durability somewhat where the wood has lower penetration. Application to less absorbent surfaces eg. Siberian larch may result in reduced durability due to less penetration of the product into the wood.
Brush or roller and brush. The product is not to be used for spray application.
Avoid application in direct sunshine, in humid weather and at low temperatures. Low temperature at night during spring and autumn may cause condensation and will cause mattening of the stain. The stain must be allowed to dry completely before exposure to moisture – please check weather report that there will be no rain the first 24 h after application.
Continue Shopping
