Manufacturer: Jotun Paints
Jotun Hardtop CA is a two-pack acrylic, isocyanate free topcoat with good gloss and colour retention. Use as a topcoat over an epoxy primer where a durable, high gloss finish is required in aggressive atmospheric conditions.
- Isocyanate free
- Good chemical resistance
- Good colour- and gloss retention
- High solids
|Application Method ||Air/Airless Spray, Brush or Roller |
|Surfaces ||Offshore Environment / Refineries / Buildings |
|VOC Level ||319g / Litre |
|Coverage ||4.8m² / Litre |
|Touch Dry ||4 Hours @ 10°C / 2 Hours @ 40°C |
|Over-Coating ||72 Hours @ 10°C / 5 Hours @ 40°C |
|Pot life @ 23°C ||4 Hours |
|Maintenance Cycle ||4 Years |
|Thinning & Cleaning ||Jotun No.7 or Jotun No.17 |
|Number of Coats ||2 |
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Coated surfaces: Clean, dry and undamaged compatible primer.
Other surfaces: The coating may be used on other substrates.
Please contact us for more information.
Typical Paint System: Barrier 1 x 75 μm (Dry Film Thickness), Jotacote Universal 1 x 150 μm (Dry Film Thickness), Hardtop CA 1 x 75 μm (Dry Film Thickness)
Other systems may be specified depending on area of use.
Protective: Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
Marine: Recommended for topside, deck and superstructure.
Spray: Use air spray or airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used for small areas.