Manufacturer: Jotun Paints
Description
Jotun Jota Armour is a three-pack, abrasion-resistant, high solids, polyamine cured epoxy coating. It is formulated to be applied in high film thickness for durability, wear resistant and anti-slip properties under dry, wet and oily conditions. Jota armour should be applied on top of a suitable primer for metallic substrates, or directly on concrete with a suitable sealer.
The third component consists of selected blend of abrasion-resistant fused, aluminium oxides.
Jota Armour is sold as kits and two kits are available, one with standard curing agent, and one with low temperature/wintergrade (WG) curing agent. Jota Armour Standard can be applied from 10°C to 40°C. Jota Armour Winter Grade can be applied from 0°C to 23°C.
- Spray application – no trowelling
- High build – one coat system
- High solids
- Non-slip surface
- Abrasion resistant
- NORSOK pre-qualification
- Heat resistance, dry atmospheric: 120°C
| VOC Level | 123g / Litre |
| Touch Dry | 8 Hours @ 10°C / 3 Hours @ 40°C |
| Over-Coating | 28 Hours @ 10°C / 6 Hours @ 40°C |
| Pot life @ 23°C | 2 Hours |
| Maintenance Cycle | 4 Years |
| Thinning & Cleaning | Jotun No.17 |
| Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Coated surfaces: Clean, dry and undamaged compatible coating (ISO 12944-4 6.1)
Other surfaces: The coating may be used on other substrates.
Please contact us for more information.
Typical use: Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Application:
Spray: Gravity Feed Hopper Gun or other suitable equipment.
Continue Shopping
