Manufacturer: Jotun Paints
The Penguard Express range is designed to speed up the production process, providing fast dry-to-recoat and fast dry-to-handle times. Penguard Express ZP is pigmented with Zinc Phosphate for increased corrosion protection.
- It is a fast drying
- High solids
- High build product
- It can be applied at sub zero surface temperatures
|Application Method ||Airless Spray or Brush |
|Surfaces ||Structural Steel, Offshore Environment, Buildings |
|VOC Level ||258g / Litre |
|Coverage ||3m² / Litre |
|Touch Dry ||2 Hours @ 10°C / 30 Minutes @ 40°C |
|Over-Coating ||4 Hours @ 10°C / 1 Hour @ 40°C |
|Pot life @ 23°C ||2 Hours |
|Maintenance Cycle ||2 Years @ 23°C |
|Thinning & Cleaning ||Jotun No.17 |
|Number of Coats ||2 |
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Blast cleaning to Sa 21⁄2 (ISO 8501-1:1988). Roughness: using abrasives suitable to achieve grade Fine to Medium G (30-85 μm, Ry5) (ISO 8503-2).
Other surfaces: The coating may be used on other substrates. Please contact us for more information.
Typical Use: Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.