Manufacturer: Jotun Paints
Description
Penguard Topcoat is a two-pack epoxy topcoat based on a polyamide cured epoxy resin. Suitable for use as a finishing coat in epoxy systems. Also on concrete where epoxy paints are specified.
This product is a part of a complete system which is certified not to spread surface flames.
- Gloss finish with fair gloss retention
- To be used as topcoat in atmospheric and immersed environments
- Excellent resistance to chemicals and solvents
Appearance Method | Spray, Brush or Roller |
Surfaces | Industrial Structures |
VOC Level | 400g / Litre |
Coverage | 8.3m² / Litre |
Touch Dry | 2.5 Hours @ 10°C / 30 Minutes @ 40°C |
Over-Coating | 14 Hours @ 10°C / 3 Hours @ ?40°C |
Pot life @ 23°C | 4 Hours |
Maintenance Cycle | Comp A - 2 Years |
Comp B - 4 Years |
Thinning & Cleaning | Jotun No.17 |
Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504. Coated surfaces Clean, dry and undamaged compatible primer. Contact us for more information. Other surfaces The coating may be used on other substrates. Please contact us for more information.
Typical Paint System: Penguard Primer 1 x 50 μm (Dry Film Thickness), Penguard HB 1 x 100 μm (Dry Film Thickness), Penguard Topcoat 1 x 50 μm (Dry Film Thickness)
Other systems may be specified depending on area of use.
Typical Use:
Marine: Recommended for topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures.
Application:
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.
Continue Shopping