Manufacturer: Jotun Paints
Penguard WF is a versatile, fast drying, two pack water borne epoxy coating which can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. It provides excellent corrosion protection and performance, and contributes to improved health, safety and environment during application. It is specially designed for new construction where fast dry-to-handle and over-coating times are required.
Penguard WF contains flash rust inhibitors which allows it to be used on a variety of surfaces; in pure water-borne coating systems and in combination
with solvent based coatings.
- Water based
- Cures down to 5°C
- Can be used on multiple surfaces
- Expected lifetime >15 years in atmospheric environments
- Fast dry-to-recoat and dry-to-handle
- Ideal for LEED® v4 projects
- Visible end of pot life
- Transport and storage down to sub-zero temperatures
- Approved as primer under Steelmaster intumescent coatings
Surface Preparation: To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
Aluminium: Abrasive blast cleaning to achieve a surface profile using approved non- metallic abrasive media which is suitable to achieve a sharp
and angular surface profile.
Galvanised steel: Light brush blasting using non- metallic abrasive leaving a clean, rough and even pattern.
Other surfaces: The coating may be used on other substrates. Please contact us for more information.
Typical Paint System: Penguard WF 2 x 75 μm (DFT) followed by Hardtop XP 1 x 60 μm (DFT).
Other systems may be specified, depending on area of use.