Manufacturer: Jotun Paints
Please click here to order from our new website
Pilot ACR is a quick drying high build, one component acrylic finish. It can be used as a single coat system in atmospheric corrosion class C2 or as a topcoat on various primers. Pilot ACR features direct-to-metal (DTM), high build and fast drying properties, and cures down to minus 10°C.
- Reduces application cost
- Improves productivity
- Increases time to first maintenance
- Semi gloss finish with good gloss retention
- It is fast drying
- High build
- It can be used direct to metal
- It can be applied at sub zero surface temperatures
|Application Method ||Airless Spray, Brush or Roller |
|Surfaces ||Marine / Refineries / Buildings |
|VOC Level ||400g / Litre |
|Coverage ||4.6m² / Litre |
|Touch Dry ||15 Minutes @ 10°C / 15 Minutes @ 40°C |
|Over-Coating ||2 Hours @ 10°C / 12 Hour @ 40°C |
|Maintenance Cycle ||4 Years |
|Thinning & Cleaning ||Jotun No.7 |
|Number of Coats ||2 |
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Power tool cleaning to min. St 2, mill scale free (ISO 8501-1:2007). Improved surface treatment (blast cleaning to Sa 21⁄2) will improve the
Coated surfaces: Clean, dry and undamaged compatible primer. Contact us for more information. For maintenance UHPWJ to WJ2 (NACE No.5/SSPC-SP 12) or Power tool cleaning to min. St 2 for rusted areas.
Other surfaces: For aluminium and galvanized surface; degreasing, light abrading or sand sweeping. The coating may be used on other substrates.
Please contact us for more information.
Typical Paint System: Pilot ACR 1 x 120 μm (Dry Film Thickness) or Barrier 77 1 x 40 μm (Dry Film Thickness), Pilot ACR 1 x 80 μm (Dry Film Thickness).
Other systems may be specified, depending on area of use.
Marine: Recommended for engines, topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures.
Spray: Use airless spray or conventional spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.