Manufacturer: Jotun Paints
Pilot II is a single pack, alkyd based topcoat for both exterior and interior use. It is very surface tolerant and can be applied with brush, roller or spray on both aged and new coatings.
This product is part of a complete system which is certified not to spread surface flames.
- High gloss finish with good gloss retention
- Good weather and colour stability
- Good hiding power
|Application Method ||Air / Airless Spray, Brush, Roller |
|Surfaces ||Marine / Engines / Industrial Structures |
|VOC Level ||421g / Litre |
|Coverage ||9.6m² / Litre |
|Touch Dry ||4 Hours @ 10°C / 1 Hour @ 40°C |
|Over-Coating ||24 Hours @ 10°C / 12 Hours @ 40°C |
|Maintenance Cycle ||4 Years |
|Thinning & Cleaning ||Jotun No.2 |
|Number of Coats ||2 |
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504. Coated surfaces Clean, dry and undamaged compatible primer. Please contact us for more information. Other surfaces The coating may be used on other substrates. Please contact us for more information.
Typical Paint System: Alkydprimer or Pilot Primer 2 x 40 μm (Dry Film Thickness) followed by Pilot II 1 x 40 μm (Dry Film Thickness).
Other systems may be specified depending on area of use.
Typical Use: Recommended as topcoat, and for touch-up purposes.
Marine: Recommended for engines, topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures.
Spray: Use air spray or airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.