ElmbridgeElmbridge

Jotun Pilot QD Primer
Jotun Pilot QD Primer
Jotun Paints

ICP-JPQDP

Jotun Pilot QD Primer

In Stock

From £24.65 (ex VAT)

£24.65
£73.60
£24.65
£73.60
£24.65
£73.60
£24.65
£73.60
£24.65
£73.60
  • Please select an option from the list above.

Manufacturer:   Jotun Paints

Description

Jotun Pilot QD Primer is a one component oxidatively drying alkyd coating. It is a fast drying, high build, zinc phosphate pigmented product. Can be used as primer or mid coat in atmospheric environments. 

Pilot QD Primer is resistant against dry heat up to 120°C. Suitable when used in conjunction with Jotun Steelmaster range of Intumescent coatings as part of overall system.

  • Fast drying
  • Corrosion preventing pigments
  • Resistant to 120°C dry heat
  • High solids
Application Method Airless Spray, Brush or Roller
Surfaces Marine / Industrial Structures
VOC Level 391g / Litre
Coverage 4.5m² / Litre
Touch Dry 20 Minutes @ 10°C / 10 Minutes @ 40°C
Over-Coating 2 Hours @ 10°C / 1 Hours @ 40°C
Maintenance Cycle 4 Years
Thinning & Cleaning Jotun No.7
Number of Coats 2

Additional Information

Surface Preparation:
Carbon steel: St 2 (ISO 8501-1)
Aluminium: The surface shall be hand or machine abraded with non-metallic abrasives or bonded fibre machine or hand abrasive pads to impart a scratch pattern to the surface and to remove all polish from the surface.
Coated surfaces: Clean, dry and undamaged compatible primer.
Other surfaces: For aluminium substrates, thorough washing and sweeping with a nonmetallic blast medium is required. The coating may be used on other substrates.

Please contact us for more information.

Typical Paint System: Pilot QD Primer 2 x 40 μm (Dry Film Thickness) followed by Ultra Topcoat 1 x 40 μm (Dry Film Thickness)

In conjunction with Intumescent coatings: Pilot QD Primer 1 x 75 μm (Dry Film Thickness)

Steelmaster according to steelmaster loading table.

Other systems may be specified, depending on area of use.

Typical Use: Suitable for properly prepared carbon steel, aluminium and wooden substrates.
Marine: Recommended for engine room, topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures.

Application: 
Spray: Use airless spray.
Brush: Recommended.
Roller: May be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.

Continue Shopping

Related Products

Jotun Thinner No.7
  • JT-7
  • Jotun Thinner No.7
  • From £29.50

We're here to help

Not sure which is the best product? Can’t find what you need?

Complete and submit this form for assistance from one of our specialist advisors.

Submit