Manufacturer: Jotun Paints
Pioner Topcoat is a single pack, acrylic resin based topcoat, available in a wide range of colours. To be used as a finishing coat for the protection of steel and concrete in a variety of climatic conditions, exterior and interior. It is water resistant, unsaponifiable and provides excellent overcoating properties with itself.
Quick drying and may be used at low temperatures. This product can be used as topcoat on top of Jotun’s Steelmaster range of intumescent coatings.
- Semi-gloss finish with good gloss retention
- Fast drying
Easy to use
|Application Method ||Airless Spray, Brush or Roller |
|Surfaces ||Marine / Industrial Structures |
|VOC Level ||536g / Litre |
|Coverage ||6.8m² / Litre |
|Touch Dry ||45 Minutes @ 10°C |
|Over-Coating ||4 Hours @ 10°C / 1.5 Hours @ 40°C |
|Maintenance Cycle ||4 Years |
|Thinning & Cleaning ||Jotun No.7 |
|Number of Coats ||2 |
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504. Coated surfaces Clean, dry and undamaged compatible primer. Contact us for more information. The coating may be used on other substrates. Please contact us for more information.
Typical Paint System: Vinyguard Silvergrey 88 2 x 80 μm (Dry Film Thickness) followed by Pioner Topcoat 1 x 50 μm (Dry Film Thickness).
Other systems may be specified, depending on area of use.
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.
Marine: Recommended for topside and superstructure.
Protective: Suitable for a wide range of industrial structures.