ElmbridgeElmbridge

Jotun Solvalitt Midtherm
Jotun Solvalitt Midtherm
Jotun Paints

ICHRC-JSM

Jotun Solvalitt Midtherm

Select a Colour
Search for your ideal colour or use the colour finder button to look up the colours we currently stock.

Selected Colour

 

 Can't find the colour you're looking for?

Use our colour match system to get the colour you need.

Select a colour to see the pricing information.

Manufacturer:   Jotun Paints

Description

Jotun Solvalitt Midtherm is a single pack, physically drying silicone acrylic coating with heat resistance up to 260°C.

It can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for insulated and non-insulated surfaces. It is recommended in combination with an inorganic zinc silicate coating as primer, providing heat resistance up to 260°C and long corrosion protection.

  • Heat resistance up to 260°C
  • Primer, mid coat or finish coat
  • Long corrosion protection
  • Quick drying
  • Colour stable at high temperatures provides a good finish, well suited as finish coat?

Substrates

  • Steel
  • Aluminium
Thinners No 7
Coverage 15m2/Litre
Gloss Level 25%
Volume Solids 40%
Surface Dry @ 23C 15 minutes

Additional Information

Surface Preparation: To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
Carbon Steel: Sa 2½ (ISO 8501-1).
Stainless Steel: Cleanliness and surface profile corresponding to Sa 2½.
Aluminium: Dry abrasive blast cleaning to SSPC-SP 13/NACE No. 6.
Galvanised Steel: Light brush blasting using non-metallic abrasive leaving a clean, rough and even pattern.

Typical Paint System: Solvalitt Midtherm 2 x 30μm (DFT)
Other systems may be specified depending on area of use.

Typical Use: 
Protective: Designed as heat resistant coating. Suitable for insulated and non insulated surfaces. Recommended in combination with an inorganic zinc silicate coating as primer, providing heat resistance up to 260 °C and long corrosion protection.

Application: 
Spray: Use air spray or airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. 

Continue Shopping

Related Products

Jotun Thinner No.7
  • JT-7
  • Jotun Thinner No.7
  • From £29.50

We're here to help

Not sure which is the best product? Can’t find what you need?

Complete and submit this form for assistance from one of our specialist advisors.

Submit