Manufacturer: Jotun Paints
Description
Jotun Steelmaster 60 SB is a single pack, solvent based, acrylic thin film intumescent coating. It is independently approved for fire protection of structural steel exposed to cellulosic fire and can be used as mid coat or finish coat in atmospheric environments. Suitable on approved primers on carbon steel substrates.
Steelmaster 60SB is a solvent based intumescent coating that provides up to 60 minutes fire protection of structural steel exposed to cellulosic fire.
- Tested to BS 476 (20 and 21)
- Majority of steel sections covered
- Ready to use, easy spray application
- Up to 60 minutes fire protection
- Fast drying
- Low loadings
| VOC Level | 346g / Litre |
| Touch Dry | 1 Hour @ 10°C / 20 Minutes @ 40°C |
| Over-Coating | 16 Hours @ 10°C / 6 Hours @ 40°C |
| Maintenance Cycle | 1 Year 6 Months |
| Thinning & Cleaning | Jotun No.7 |
| Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Bare steel: Blast cleaning to Sa 21⁄2 (ISO 8501-1:2007). Roughness: using abrasives suitable to achieve grade Fine to Medium G (30-85 μm, Ry5) (ISO 8503-2).
Coated surfaces: Clean, dry and undamaged compatible primer.
Other surfaces: The coating may be used on other substrates.
Please contact us for more information.
Typical Paint Systems: All Intumescent Coatings should be applied over a compatible primer. The Intumescent coating, either 60/120 or 60 WB, then has to be applied to the correct loading which is determined by the steel size. At Elmbridge we can offer to calculate the loading and then quantify the material required for the particular project. Please call for your tailor made specification.
Suitable Primers:
Single Pack - Jotun Pilot QD
Two Pack – Jotun Penguard Express ZP
We would also recommend the top coating of the Intumescent paint to protect it and give a more aesthetically pleasing finish.
Suitable topcoats:
Solvent Based – Pioneer Topcoat
Water based – Waterfine Topcoat
Typical Use: Specially designed as passive fire protection for steel constructions. Suitable for structural steel exposed to external environments up to corrosivity category C4 (ISO 12944-2), with a compatible topcoat.
Application:
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas, care must be taken to achieve the specified dry film thickness.
Continue Shopping
