Manufacturer: Jotun Paints
Description
Tankguard DW is a solvent free, two pack epoxy, designed for use in tanks for drinking water. It contains no solvents or flexibilisers such as benzyl alcohol. Tankguard DW passes the strictest requirements for potable water (e.g. BS 6920).
Can be used as a primer and finish coat in atmospheric and immersed environments. It is easy to apply with standard airless spray equipment with
reasonable lengths of hoses.
- Potable water/drinking water approvals – BS 6920
- Solvent free
- Easy to apply with airless spray
- Smooth surface
Substrates
- Mild and Stainless Steel
- Concrete
Additional Information
Surface Preparation: To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
Carbon steel: Sa 2½ (ISO 8501-1)
Concrete: Dry abrasive blast cleaning to SSPCSP 13/NACE No. 6.
Stainless steel: Abrasive blast cleaning to achieve a surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.
Please contact us for more information.
Typical Paint System: Tankguard DW 3 x 150 μm (DFT)
Other systems may be specified, depending on area of use.
Application methods:
Spray: Use airless spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: Roller application only to be used for scallops, ratholes, small pipes etc.
Continue Shopping
