Manufacturer: Marathon Coatings
Description
Other colours available on request.
Marathon Hammer Finish is a durable topcoat for machinery, tools, motor casings and other applications where a traditional hammered finish can hide surface defects.
- Quick drying, easy to use
- High build, good hiding power
- Good resistance to mild solvents and oils
- Available in a range of colours
Application Method | Conventional Spray or Brush |
Surfaces | Machinery Tools / Motor Casing |
VOC Level | 580g / Litre |
Coverage | 10-12m² / Litre |
Touch Dry | 15 Minutes @ 10°C |
Over-Coating | 24 Hours @ 10°C |
Maintenance Cycle | 2 Years |
Thinning & Cleaning | Marathon 737 |
Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces should be clean, dry and free from grease, rust, millscale, and etc. The primer base component should be well mixed and then the acid component should be added and mixed in the correct proportion. Apply in the normal manner ensuring that all areas are completely covered. For further information, contact our technical department.
Typical Use: Can be used for machinery tools, motor casings and other applications where traditional hammered finish can hide surface defects.
Application: Brush / spray
Spray Guns |
Conventional | 1.4 - 1.8 tip @ 3.5 - 4.2 bar |
Suction Feed HVLP | 1.8mm tip @ 0.7 bar (max) |
Pressure pot HVLP | 1.0 - 1.4mm tip @ 0.7 bar |
Continue Shopping