Manufacturer: Marathon Coatings
Description
Marathon Polyacrylic HA is a two pack primer/topcoat, featuring excellent direct adhesion properties for a wide range of difficult substrates, including some plastics. It offers a tougher, more durable coating for galvanised steel, aluminium and brass items and provides good anti corrosive properties even as a clear coat. Can be applied using conventional and airless spray methods.
- Excellent adhesion
- Superb glossy acrylic finish
- Wide range of colour & gloss levels
- Anticorrosive properties
| Application Method | Conventional Spray |
| Surfaces | Galvanised Steel, Aluminium items |
| VOC Level | 433g / Litre |
| Touch Dry | 4 Hours @ +10°C |
| Over-Coating | 18 Hours @ 20°C |
| Maintenance Cycle | 2 Years |
| Thinning & Cleaning | Marathon 787 |
| Number of Coats | 2 |
This product also requires use of Marathon Polyacrylic HA Activator.
Additional Information
Surface Preparation: Ensure surfaces are free from dust, rust, oil, grease and soluble salts. A combination of degreasing and steam cleaning or cleaning with high pressure water jet is recommended for zinc surfaces.
Typical Use: Galvanised steel, Aluminium items, Brass items, Some plastics.
Application:
Conventional Spray: Thinning of the coating will reduce the film build qualities. A dry film thickness of 75 microns is achievable by brush. Avoid excessive film thickness as this will cause through-drying problems.
Continue Shopping
