Manufacturer: Marathon Coatings
Description
Primabond II is a two pack polyvinyl butyral etch primer which can be used as a pre-treatment primer for galvanised/metallic sprayed surfaces, aluminium and other difficult substrates that require high adhesion properties. Its quick drying characteristics allow rapid over coating. It can also be stoved / baked when used under a Powder Coated finish. As a two pack it can be applied as a primer under virtually any other coating from the Marathon range.
- Excellent adhesion
- Direct to galvanised surfaces
- Long pot life
- Thin film
- Overcoat with most paints
- Can be used under Powder Coatings
Application Method | Spray Gun |
Surfaces | Galvanised or Metallic Sprayed Surfaces / Aluminium |
VOC Level | 670g / Litre |
Coverage | 10-12m² / Litre |
Touch Dry | 10-15 Minutes @ 20°C |
Over-Coating | 12 Hours - Dependable on Conditions |
Maintenance Cycle | 2 Years |
Thinning & Cleaning | Not Required |
Number of Coats | 2 |
Additional Information
Surface Preparation: Aluminium, galvanised & Mild steel: Surfaces must be clean, dry and free from dust, grease, oil, millscale, etc. For best results blast clean to SA2.
Typical Paint System: 1 x 15 μm Primabond II (DFT). Subsequent coatings to suit application.
Other systems may be specified, depending on area of use.
Typical Use: Can be use for Galvanised/metallic sprayed surfaces, Aluminium and other difficult substrates that require high adhesion properties.
Continue Shopping