Manufacturer: Marathon Coatings
Description
Marathon Primagalv is a fabrication / shop primer based on a synthetic polymer containing 92% Zinc. This is left in the dry film of the coating to act as a rust Inhibitor and offering long term protection of the substrate. Often used on steel in areas where corrosion will be imminent such as gates, railings and barriers in costal or roadside environments. Can be over coated for cosmetic reasons with a wide range of topcoats. Primagalv is ideally suited to spot priming, rust prevention and touching up of galvanised steel.
- Easy to use, single pack product
- Quick Drying
- Contains 92% Zinc by weight in the dry coating
- Excellent cathodic protection against rust
- Alternative to galvanising
- High build
| Application Method | Airless Spray, Brush or Roller |
| Surfaces | For Steel- Rust Prevention |
| VOC Level | 380g / Litre |
| Coverage | 8m² / Litre |
| Touch Dry | 15 Minutes @ +10°C |
| Over-Coating | 2-4 Hours @ +10°C |
| Maintenance Cycle | 2 Years |
| Thinning & Cleaning | Marathon 737 |
| Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½ or abrade mechanically.
Typical Paint System: 2 x 50 μm Primagalv coating (DFT). Other systems may be specified, depending on area of use.
Typical Use: A barrier coating for steel, giving higher levels of rust prevention and spreading than conventional single pack primers.
Application: Temperature of substrate should be a minimum of 3°C above the dew point, ideally 18°C – 21°C.
Airless spray: Recommended (15-19 thou tip; pressure 2500 psi)
Brush & roller: Recommended for smaller areas or touch ups.
Continue Shopping
