Manufacturer: Marathon Coatings
Marathon Primathon MIO is designed as an intermediate anticorrosive coating for steel where increased durability is needed for the protection of structural steel, external tanks, pipes, cranes and numerous steel structures and objects. It provide’s fast dry-to-recoat and fast dry-to-handle times designed to speed up the production process, and increase the speed and efficiency for painting contractors, even at low temperatures.
- Easy to use, single pack product
- Quick air drying
- Provides good ultra violet protection
- High volume solids
- High build characteristics
|Application Method ||Airless Spray |
|Surfaces ||For Shop or Site Application |
|VOC Level ||387g / Litre |
|Coverage ||5.7m² / Litre |
|Touch Dry ||16 Hours @ +10°C |
|Over-Coating ||4 Hours @ +35°C |
|Maintenance Cycle ||2 Years |
|Thinning & Cleaning ||Marathon 737 |
|Number of Coats ||2 |
Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½ or abrade mechanically.
Typical Paint System: 2 x 50 μm Primathon MIO (DFT). Other systems may be specified, depending on area of use.
Typical Use: Can be used for shop or site application?. Primathon MIO may be overcoated with white spirit based decorative paints only.
Application: Paint temperature should ideally be at a minimum of 15 ºC. Relative humidity should not exceed 85% and the substrate temperature should remain at least 3 ºC above the dew point. Ensure adequate ventilation. Ambient temperature should preferably remain at a minimum 10 ºC. Only apply this product when the above conditions can be maintained throughout the critical application and drying/curing process.
Airless spray: Output fluid pressure at tip 2500-3500 p.s.i
Tip size: 15-21 thou (0.38-0.53 mm)