Manufacturer: Marathon Coatings
Description
Ideally suited to exposed steelwork in agricultural/industrial buildings or structures where a topcoat is not necessary. Its sheen characteristics give Primathon Sheen increased UV protection, maintaining a consistent finish, ideally suited to exposed surfaces. Preferably applied with airless spray for maximum coverage, but Primathon Sheen may also be sprayed conventionally, brushed or rolled.
Key Features:
| Application Method | Spray, Brush or Roller |
| Surfaces | Steel in moderate environments |
| VOC Level | 435g / Litre |
| Coverage | 10m² / Litre |
| Touch Dry | 15 Minutes @ 18-21°C |
| Over-Coating | 2 - 4 Hours @ 18-21°C |
| Maintenance Cycle | 2 Years |
| Thinning & Cleaning | Marathon 737 |
| Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½ or apply to undamaged, compatible primer.
Typical Use: Anti-corrosive primer for steel and aluminium in moderate, non-aggressive environments.
Application: Temperature of substrate should be a minimum of 3°C above the dew point, ideally 18°C – 21°C.
Airless Spray: Recommended (15-19 thou tip, pressure 2500 psi)
Brush & Roller: Recommended
Continue Shopping
