Manufacturer: Marathon Coatings
Description
Please click here to order from our new website
Marathon Prime Finish is a versatile and easy-to-use, high build, gloss primer/topcoat for application direct to metal or bare steel. Suitable for a wide range of applications including steel fabrications, plant and machinery, containers and tanks, gates and railings, and almost any steel manufactured item. Also used extensively in the portable accommodation industry.
- Fast track, direct to metal application
- Quick drying
- Versatile & easy to use
- Contains Zinc Phosphate anti-corrosive pigments
| Application Method | Airless Spray, Brush or Roller |
| Surfaces | Machinery, Gates & Railings |
| VOC Level | 504g / Litre |
| Coverage | 4.5m² / Litre |
| Touch Dry | 20 Minutes @ +10°C |
| Over-Coating | 4 Hours @ +10°C |
| Maintenance Cycle | 2 Years |
| Thinning & Cleaning | Marathon 737 |
| Number of coats | 2 |
Additional Information
Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½. If blast cleaning is not possible, remove loose particles and mill scale with mechanical abrader.
Typical Use: Easy-to-use primer/topcoat sutable for a wide range of applications including plant and machinery, gates and railings, architectural metalwork and general steel fabrications.
Application: Temperature of substrate should be a minimum of 3°C above the dew point, ideally 18°C – 21°C
Airless spray: Recommended (15-19 thou tip; pressure 2500 psi)
Brush & Roller: Recommended for smaller areas.
Continue Shopping
