Manufacturer: Marathon Coatings
Description
Clearance stock only available whilst stocks last!
Marathon Strong Finish is a premium quality air-drying polyurethane topcoat giving a superb finish. It is suitable for decorative and industrial applications offering a high-level of corrosion resistance when used in conjunction with a suitable Marathon Primer. Commonly used on agricultural plant, machinery, and industrial vehicles.This fully reacted polyurethane alkyd exhibits relatively fast drying properties, good film toughness and good abrasion resistance, as well as acceptable mild chemical resistance.
- Premium quality finishing topcoat
- Easy to use and rapid through-drying
- Very durable and good weather resistance
- Isocyanate-free, safe to use
- Good gloss and colour retention
- Hard wearing finish
- Fuel splash resistant
Application Method | Air / Airless Spray, Brush or Roller |
Surface | For Industrial Applications |
VOC Level | 449g / Litre |
Coverage | 9m² / Litre |
Touch Dry | 1-1.5 Hours @ 18-21°C |
Over-Coating | 6-8 Hours @ 18-21°C |
Maintenance Cycle | 2 Years |
Thinning & Cleaning | Marathon 767 |
Number of Coats | 2 |
Additional Information
Surface Preparation: All surfaces to be clean, dry and free of contamination. Blast clean steel to SA 2½ or apply to undamaged, compatible primer.
Typical Use: Anti-corrosive primer for steel in moderate, non-aggressive environments, where a topcoat is not necessary.
Application: Temperature of substrate should be a minimum of 3°C above the dew point, ideally 18°C - 21°C.
Airless spray: Recommended (15-19 thou tip; pressure 2500 psi)
Brush and Roller: Recommended
Conventional Spray: thin up to 10%
Continue Shopping