Manufacturer: Marathon Coatings
Thermathon Ultra Black is a single pack, silicone heat resistant paint. It forms a tough, durable heat-resistant coating for a wide range of steel and iron products including exhausts, engines, stoves, fires, barbecues, and gas fires.
- Heat resistant to 550ºC
- Fast drying
- Good corrosion protection
|Application Method ||Spray Gun |
|Surfaces ||Steel / Iron Products |
|VOC Level ||500g / Litre |
|Coverage ||10m² / Litre |
|Touch Dry ||30 Minutes @? 20°C |
|Over-Coating ||1 - 24 Hours Dependable on Humidity |
|Maintenance Cycle ||2 Years |
|Thinning & Cleaning ||Marathon 737 |
|Number of Coats ||2 |
Mild steel: Surfaces must be clean, dry and free from dust, grease, oil, millscale, etc. For best results blast clean to SA2 and coat with a suitable heat resisting primer within 4 hours.
Typical Paint System: Thermathon Ultra Black 2 x 35 μm (DFT)
Other systems may be specified, depending on area of use.
Application: Only apply in conditions of good ventilation which should be maintained during drying. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and steel temperature should remain at least 3ºC above the dew point.
|Spray Guns |
|Conventional ||1.4 - 1.8mm tip @ 3.5 - 4.2 bar |
|Suction Feed HVLP ||1.8mm tip @ 0.7 bar (Max) |
|Pressure pot HVLP ||1.0 - 1.4mm tip @ 0.7 bar |