ElmbridgeElmbridge

Marathon Vynagrip (Free Beanie with each order)
Marathon Vynagrip (Free Beanie with each order)
Marathon Coatings

IC1CS-MV

Marathon Vynagrip (Free Beanie with each order)

In Stock

From £38.70  £22.45 (ex VAT)Special offer 42% Off

£78.30
£24.36
  • Please select an option from the list above.

Manufacturer:   Marathon Coatings

Description

Marathon Vynagrip is a single pack high build vinyl coating which offers excellent adhesion properties to ferrous and non-ferrous substrates. With these characteristics it performs exceptionally well on prepared galvanised surfaces. It also features rapid drying technology making it suitable for application on site by both brush and spray methods. Is available in a range of colours - contact our sales team with your requirement

  • Direct to galvanised substrates
  • Quick drying
  • Excellent adhesion properties
  • Ideally suited to airless spray applications.
  • Non-sag properties allow good film build to 75 microns D.F.T
  • Can be applied down to 5°C
  • Tough, flexible film, resistant to water
Application Method Spray Gun
Surfaces Decorative and Structural Metalwork
VOC Level 680g / Litre
Coverage  6-8m² / Litre
Touch Dry 10 Minutes @ 20°C
Over-Coating  Minimum of 75 Microns must be achieved by applying further coats of high build vinyl.
Maintenance Cycle 2 Years
Thinning & Cleaning Marathon 737
Number of Coats 2

Additional Information

Surface Preparations: Mild steel: Surfaces must be clean, dry and free from dust, grease, oil, millscale, etc. For best results blast clean to SA2 and coat with a suitable blast primer within 4 hours. Aluminium & galvanised steel must be pre-treated before application.

Typical Use: A rapid drying, non-convertible coating for application for ferrous and non-ferrous, decorative and structural metalwork where a high level of corrosion resistance is required. It may also be used as a primer/finish for most adequately prepared substrates, exhibiting good adhesion to well-prepared galvanised steel surfaces.

Application:
Airless spray: Up to 5% thinners may be added to suit equipment
Conventional Spray: up to 15% thinners may be added to suit equipment but a lower film thickness will be achieved.
Brush / roller: Apply evenly using a well-loaded brush. Do not attempt to brush out or lay off.

Continue Shopping

We're here to help

Not sure which is the best product? Can’t find what you need?

Complete and submit this form for assistance from one of our specialist advisors.

Submit