The P series filter is a 3 micron filter designed as a pre filter for the removal of water, oil and solids down to 3 microns. It is the initial mandatory filter required for all pneumatic equipment to comply with ISO8573-1 Class 3.
|Model ||CFM/Min ||Connection |
|KFE FTP51 ||30 ||G 3/8" |
|KFE FTP72 ||42 ||G 1/2" |
|KFE FTP111 ||65 ||G 3/4" |
|KFE FTP198 ||116 ||G 1" |
|KFE FTP330 ||194 ||G 1 1/2" |
|KFE FTP480 ||286 ||G 1 1/2" |
|KFE FTP750 ||441 ||G 1 1/2" |
Air Filtration Systems
Good air treatment is an essential component to every industrial compressed air supply.
Too often, companies invest in a quality air compressor set-up with pneumatic tools and equipment, but overlook the real need for adequate filtration.
Inadequate or no filtration leads to premature corrosion and wear amongst the tools and equipment being operated, and this can amount to high costs in repair and replacement.
The Pneutech PF Series industrial filtration is second-to-none in quality and performance. These filters are made from heavy aluminium castings for high strength to withstand pressures up to 230psi and to give long life in all environments. The extra large aluminium bowl area adds to the filtration capacity by dissipating the heat build-up in the air supply and turning water vapour into condensate form for easy drainage. Each filter comes complete with an auto drain for hassle-free drainage, and option for a differential pressure gauge to enable to determine the saturation level of the replaceable filter element.