Manufacturer: Rust-Oleum
Description
Rust-Oleum 3202 Galvinoleum is a single pack, solvent based, super adhesion primer. It adheres to galvanised steel and all smooth surfaces.
- Extremely high coverage, 35m2/l
- Recoatable in just 30 minutes
- Solvent-based acrylic, single component
- Rapidly recoatable
- Lasting adhesion, also on galvanised steel
Adheres to difficult surfaces including:
- Glass
- Porcelain
- Most Plastics
- Smooth Surfaces
- Galvanizing
- Stainless Steel
- Aluminium
- Copper
Application Method | Brush |
VOC Level | 741g / Litre |
Coverage | 35m² / Litre |
Touch Dry | Remains Tacky |
Over-Coating | Within 24 Hours - After 30 minutes |
Maintenance Cycle | 5 Years |
Thinning & Cleaning | Rust-oleum thinner 160 |
Number of Coats | 2 |
Additional Information
Surface Preparation: Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents.
Remove previous coatings completely. Remove salts, ‘white rust’, etc., by washing with RUST-OLEUM Surfa-Etch 108 Etching Solution. The surface must be clean and dry during application.
Typical Paint System
3202 Galvinoleum 1 x 15µm
(Dry Film Thickness)
7500 Alkythane 1 x 75µm
(Dry Film Thickness)
Typical Use: Adheres to all those difficult surfaces such as: glass, porcelain, most plastics, and other smooth surfaces, galvanizing, stainless steel, aluminium, copper etc.
Application: Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Brush: Use natural bristles, longhair brushes.
Air-atomised spray: Not recommended.
Airless spray: Not recommended
Cleanup: Use Rust-oleum Thinner 160 or aromatic hydrocarbons
Continue Shopping