Rust-Oleum Biosan Aqua Plus is a two pack, solvent free, hygiene wall coating. It is ideal for walls and ceilings where hygiene control is essential and high abrasion resistance is needed.
- Solvent free, low odour
- Easy to clean
- Chemical resistant
- Excellent opacity
- Exceptional abrasion resistance
- Active ingredient Bactron has been scientifically proven to kill most types of bacteria include super bugs.
Suitable for use in:
- Food processing plants
- Leisure centres
|Application Method ||Spray, Brush or Roller |
|VOC Level ||10g / Litre |
|Coverage ||7m² / Litre |
|Touch Dry ||3 Hours @ 20°C |
|Over-Coating ||24 Hours @ 24°C |
|Pot life ||2 Hours |
|Maintenance Cycle ||2 Years |
|Thinning & Cleaning ||Water |
|Number of Coats ||2 |
Surface Preparation: The substrate should be dry and clean, free from ascending humidity and sufficiently coherent (tensile strength min. 6 kg/cm2). Biosan Aqua Plus can be applied directly on most mineral substrates (i.e. old concrete, tiles, glass, etc). Curing compounds in case of poly-concrete have to be removed by means of grit blasting. On new concrete or non-porous concrete, remove cement grout by grit-blasting or treatements with Rust-Oleum Surfa Etch 108. Porous substrates shall be impregnated with Biosan Aqua Plus diluted with 10 to 20% water. Biosan Aqua Plus may not be applied on a flexible paint coat or a moving substrate.
Typical Use: For the interior coating of walls and ceilings in areas where high abrasion resistance is
Application: Brush/roller: Dilute 1st coat with max. 10% water. Apply 2nd coat preferably undiluted.
Air-atomised spray: Not recommended.
Airless spray: Nozzle: 021 - 023 / Pressure: 220 bars.
1st coat: dilute with max. 10% water.
2nd coat: dilute with max. 5% water.
Typical Paint System:
Biosan Aqua Plus 2 x 70 μm (Dry Film Thickness)
Other systems may be specified depending on area of use.