Waterproofing product based on solvent soluble high polyers. Instantly waterproof and up to 1300% elastic - good resistance against weather influences, mineral acids (max. 10% in water) - not resistant against solvents and alkaline substrates - does not contain bituminous products - excellent adhesion to different substrates.
Waterprrof finish of roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes etc.
Fillcoat Fibres has the added benefit of glass reinforced fibres to help in repairing the worst of leaks.
- Instantly waterproof - to 1300% elastic
- Good resistance against weather influences, mineral acids (max. 10% in water)
- Excellent adhesion on different substrates
|Application Method ||Spray, Brush or Roller |
|Surfaces ||Roofs, Non-Walkable Terraces |
|VOC Level ||485g / Litre |
|Coverage ||1 - 1.5m² / Litre |
|Touch Dry ||4 Hours @ 20°C |
|Over-Coating ||3 - 14 Days @ 20°C |
|Maintenance Cycle ||5 Years |
|Thinning & Cleaning ||Thinner 22 or White Spir |
|Number of Coats ||2 |
Remove dust, mud, grease, moss and withered leaves carefully. The spots to be repaired are cleaned with a hard broom and sponged. After cleaning, Fillcoat can be applied directly on bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, tiles, etc. Porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Primer 44HS.
In case of repeatedly repairted spots, important or active cracks, Fillcoat without fibres is to be reinforced with Dacfill-fleece: apply a coat of Fillcoat (about 1 l/m2), unroll Dacfill-fleece in it and cover it immediately with another coat of Fillcoat.
Typical Use: Waterproof finish of roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc.
Application: To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Brush: Do not dilute.
Roller: Not recommended.
Air-atomised spray: Not recommended.
Airless spray: Not recommended.
Cleanup: Thinner 22 or white spirit.