Waterborne, acrylic emulsion for high-quality indoor works. Decorative coating with a matt finish for indoor walls and ceilings.
- Excellent flow
- Good mechanical resistance against rubbing
- High covering power
- Can be applied to most substrates (plaster, bricks, concrete, etc)
|Application method ||Spray, Brush or Roller |
|Surfaces ||Masonry, cement, plaster, concrete |
|VOC Level ||25g / Litre |
|Coverage ||7 - 10m² / Litre |
|Touch Dry ||40 Minutes @ 20°C |
|Over-Coating ||4 Hours @ 20°C |
|Maintenance Cycle ||2 Years |
|Thinning & Cleaning ||Water |
|Number of Coats ||2 |
Surface Preparation: Old cleaned layers in good condition and light porous substrates may be recoated directly with Paracem Deco.
Very porous substrates, smooth plaster and water-resistant plasterboard are to be impregnated first with a coat of the 1/1 mixture Pegafix + Paracem Deco with a consumption of 12 m2/l per coat.
Nicotine stains must be isolated first with Pegaprim Isofix, Pegamat Aqua or Pegamat RL. Old damp spots must be isolated with Pegamat RL or Pegaprim Isofix.
Unpainted woodwork must be treated appropriately first and a priming coat must be applied. Metal objects without rust spots are to be pre-treated with 769 Primer. On glass fibre, apply preferably first a coat of Paracem Deco Satin before finishing with a coat of Paracem Deco.
Typical Paint System
Paracem Deco Matt/Satin 2 x 45 μm (Dry Film Thickness) Other systems may be specified depending on area of use.
Typical Use: For old or new substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels.
Brush: Apply with flat brush.
Roller: Apply with dispersion roller.
Air-atomised spray: Dilute with water (3 - 5%).
Airless spray: Nozzle: 013 - 018 / Pressure: 180 bars.
- For outside use: do not dilute.
- For inside use: dilute with 5 to 10% of water or even better with 5% of Fair-Décor.
Minimum 5C / Maximum 80 % R.H.