Hydroplus AF72 is a clear, self-sealer for interiors which ensures good chemical resistance, hardness, transparency and resistance to thermoplasticity. Thanks to the contents of acrylic/polyurethane resins and to its properties of excellent pore marking, it is particularly suitable for two coat systems for open pore.
AF72 may be tinted with small quantities of waterbased stains from series AC600 or AC1810 for more colour depth of the finishing. Good vertical hold and hardness, together with good chemical resistance, make AF72 suitable for application on house stairs; in this case, we recommend crosslinking AF72 with 1% of a blend of XA4080 and water at 50%. For best chemical-physical properties, also add 3% of XA4095 for double crosslinking. Stir the blend well, possibly under mechanical stirring, and do not exceed recommended dosage.
- High abrasion resistance
- Good chemical resistance
- Resistance to thermoplasticity
- Coat on coat
- Available in 10, 20, 40, 60 & 90% gloss
- FIRA 6250 Severe Rated
|Gloss Level ||10%, 20%, 40%, 60% and 90% |
|Hardner ||XA4080 |
|Mix Ratio ||1% |
|Thinners ||Water |
|Volume Solids ||31% |
|Spreading Rate ||9m²/litre |
|Application Method ||Conventional, Air/Airless, Electrostatic Spray Guns |
|Surfaces ||Doors, Furniture, Turned Parts, Frames, Skirting Boards, Wall panelling, Stairs |
|Touch Dry ||1 hour @ 20°C |
|Over-Coating ||24 hours @ 20°C |
|Maintenance Cycle ||15 Months |
|Number of Coats ||2 |
With waterborne stains from AC1810 or AP1221 series, which can be added to, if required, with small percentages of AC0600 stains for more colour depth.
Typical Paint System
First coat AF72 and then AF72